Damde

Buzzer BPC3215W


+
  • 16.1(1).jpg
  • 16.3(1).jpg
  • 16.4(1).jpg
  • 16.5(1).jpg
  • 16.6(1).jpg

Buzzer BPC3215W

Parts shall be measured under one condition (temperature: 5~35 ℃, humidity: 45% ~ 85% R.H., atmospheric pressure: 860 ~ 1060hPa), unless standard conditions (temperature: 25±3 ℃, humidity: 60±10%R.H. atmospheric pressure: 860 ~ 1060hPa) are adjusted.

1. Technical specifications Product test conditions: temperature: 5~35 ℃, humidity: 45% ~ 85% R.H., air pressure: 860 ~ 1060hPa. Standard test conditions: temperature: 25±3 ° C., humidity: 60±10%R.H. Air pressure: 860-1060hPa. 1 rated voltage 24VDC2 working voltage 5-28VDC3 rated current Max.30mA,at24VDC4 output sound pressure (10cm) Min.90dB,at24VDC5 resonant frequency 3500±500 Hz6 tone Continuous7 operation
1. Technical specifications Product test conditions: temperature: 5~35 ℃, humidity: 45% ~ 85% R.H., air pressure: 860 ~ 1060hPa. Standard test conditions: temperature: 25±3 ° C., humidity: 60±10%R.H. Air pressure: 860-1060hPa. 1 rated voltage 24VDC2 working voltage 5-28VDC3 rated current Max.30mA,at24VDC4 output sound pressure (10cm) Min.90dB,at24VDC5 resonant frequency 3500±500 Hz6 tone Continuous7 operation
Online message

Keywords: buzzer | horn | materialized film

Product Description

1. Technical Parameter
Measuring condition

Part shall be measured under a condition (Temperature: 5~35℃, Humidity: 45% ~ 85%R.H., Atmospheric pressure: 860 ~ 1060hPa) unless the standard condition (Temperature: 25±3℃, Humidity: 60±10%R.H. Atmospheric pressure: 860 ~1060hPa) is regulated to measure.

1 Rated Voltage 12VDC
2 Operating Voltage 5- 28 VDC
3 Rated Current Max.30mA, at 12VDC
4 Sound Output at 10cm Min.88dB, at 12VDC
5 Resonant Frequency 3200±500Hz
6 Tone Continuous
7 Operating Temperature -20 - +70℃
8 Storage Temperature -30 - +80℃
9 RoHS Yes
10 Weight Approx 3 g

2. Dimensions Unit: mm

*Housing Material: Black ABS

3. Electrical And Acoustical Measuring Condition

Recommended Setting

Recommended Test Circuit

4.Reliability Test

After any following tests the part shall meet specifications without any degradation in appearance and performance except SPL. SPL shall not deviate more than -5dB from the initial value
a)Ordinary Temperature Life Test
The part shall be subjected to 96 hours at 25±10℃. Input rated voltage Resonant frequency, 1/2 duty Square wave.
B )High Temperature Test
The part shall be capable of with standing a storage temperature of +80℃ for 96 hours.
c)Low Temperature Test
The part shall be capable of with standing a storage temperature of -30℃ for 96 hours.
d)Humidity Test
Temperature:+40℃±3℃ Relative Humidity:90%~95% Duration: 48 hours and expose to room temperature for 6 hours
e)Temperature Shock Test
Temperature:70℃ /1hour→ 25℃/3hours→-30℃/1hour→ 25℃/3hours (1cycle)
Total cycle: 10 cycles
f)Drop Test
Standard Packaging From 75cm(Drop on hard wood or board of 5cm thick, three sides, six plain.)
g)Vibration Test
Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes

Note:

As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. spl down) may occur if foreign material enter it.

5.Packing

packing requirements

1. 25/plastic bag packing 100PCS/bag number: F6-611
2. inner box 100 PCS/box number: f6-051
3. Outer box 800 PCS/box 40*39*25 item number: F6-007

mark requirements

Inner box:

according to customer order

Outer box:

according to customer order

Online message

Submission

Copyright©2023 All Rights Reserved of Changzhou FHD electronics Co.,Ltd.

Business license